Programmable logic devices (PLDs) offer inherent time-to-market and design flexibility advantages over...

Utilizing embedded microcontrollers for industrial applications requires special attention given the...

Reducing the size and improving the efficiency of AC-DC power supplies are constant pressures. In addition...

For a majority of applications implemented today, the Intermediate Bus Architecture (IBA) has become...

When considering gate drive requirements, the three most important parameters for eGaN FETs are (1) the...

Every electronic system needs a timing device. And crystal (XTAL) resonators are often the go-to solution....

Low-power electrical transients generated within a facility are the primary cause of failure to AC/DC...

As the costs for electricity generated by renewables such as wind and solar decrease and ultimately reach...

As electronic systems continue to trend toward lower voltages with higher currents and as the speed of...

Almost every switched-mode power supply (SMPS) needs an EMI (Electro Magnetic Interference) input filter...

This guide will begin by reviewing instrument fundamentals, learning how to use SMUs, and examining the...

One of the primary purposes of a gate driver is to enable power switches to turn on and off faster, improving...

Deembedding, often a necessary and complex task, is made easier with an integrated hardware and software...

This Application Note was written to provide insight into the one time requirement for ‘type' testing...